SACHS Race Engineering releasers

SACHS Race Engineering releasers
Since 2005, SRE is offering a specially developed central releaser (CSC = Concentric Slave Cylinder) for push-type control of RCS racing clutches.

Advantages
To achieve the greatest possible strength and to prevent leakages, the housing for the central releaser is a single component.

The releaser bearing is designed for the high rpm levels of racing engines. The actuation diameter of the releaser is specially adjusted to the diameter of the RCS clutches.

This racing releaser was designed to generate as little friction as possible in the system. This has been achieved by means of a special low-friction coating, as well as a low-friction sealing system.

In general racing clutches have higher release forces. This means that the pedal forces that drivers have to exert are also considerably higher. However, the central releaser developed specifically for racing clutches features a higher hydraulic volume, which lowers the pedal forces for drivers.

Releaser technical drawing here.
Part numberDXinXoutYinYoutFittingsAdapter platePrice, excl. VAT
88 3182 99B 51838mm66.10mm81.10mm71.10mm86.10mm++428,00 €
88 3182 99B 52249mm66.10mm76.10mm----428,00 €
88 3182 99B 53538mm57.20mm72.20mm----428,00 €
88 3182 99B 53838mm57.20mm72.20mm62.20mm77.20mm++428,00 €
88 3182 999 54638mm42.50mm54.50mm50.00mm62.00mm++428,00 €


Releaser technical drawing here.
Part numberDXinXoutYinYoutFittingsAdapter PlatePrice, excl. VAT
88 3182 99B 52638mm53.00m65.00mm58.00mm70.00mm++428,00 €
88 3182 99B 53349mm56.90mm68.90mm----428,00 €


88 3182 99B 522
88 3182 99B 535
88 3182 99B 533
88 3182 99B 518
88 3182 99B 538
88 3182 99B 526
88 3182 999 546
Hydraulic cross-sectional area820.70mm2820.70mm2741.00mm2
Hydraulic fluidDOT 4DOT 4DOT 4
Thread pressure port on the housing3/8x24 UNF3/8x24 UNF3/8x24 UNF
Thread bleeding port on the housing3/8x24 UNF3/8x24 UNF3/8x24 UNF
Thread pressure port adapter-DASH 4DASH 4
Thread bleeding port adapter-DASH 3DASH 3