Cyl.Bore: 75.00mm is STD Compression Height: 30.8mm Length: 48.8mm Recess Depth: -5.0mm Bolt d.: 19.0mm Bolt Length: 50.0mm Info: alfin, skirt MOS2 treated, fits tapered con. rod/td> Piston rings: 1.20x1.20x2.00mm

Cyl.Bore: 75.00mm is STD Compression Height: 30.8mm Length: 48.8mm Recess Depth: -5.0mm Bolt d.: 19.0mm Bolt Length: 50.0mm Info: alfin, skirt MOS2 treated, fits tapered con. rod/td> Piston rings: 1.20x1.20x2.00mm

Cyl.Bore: 75.00mm is STD Compression Height: 30.8mm Length: 48.3mm Recess Depth: -2.74mm Bolt d.: 19.0mm Bolt Length: 51.0mm Info: 1st ring groove anodized, skirt MOS2 treated, fits tapered con. rod/td> Piston rings: 1.20x1.20x2.00mm

Cyl.Bore: 75.00mm is STD Compression Height: 30.8mm Length: 48.3mm Recess Depth: -2.74mm Bolt d.: 19.0mm Bolt Length: 51.0mm Info: 1st ring groove anodized, skirt MOS2 treated, fits tapered con. rod/td> Piston rings: 1.20x1.20x2.00mm

Cyl.Bore: 75.00mm is STD Compression Height: 30.8mm Length: 48.3mm Recess Depth: -2.74mm Bolt d.: 19.0mm Bolt Length: 51.0mm Info: 1st ring groove anodized, skirt MOS2 treated, fits tapered con. rod/td> Piston rings: 1.20x1.20x2.00mm

Cyl.Bore: 75.00mm is STD Compression Height: 30.8mm Length: 48.3mm Recess Depth: -2.74mm Bolt d.: 19.0mm Bolt Length: 51.0mm Info: 1st ring groove anodized, skirt MOS2 treated, fits tapered con. rod/td> Piston rings: 1.20x1.20x2.00mm

Cyl.Bore: 77.00mm is STD Compression Height: 27.0mm Length: 46.0mm Recess Depth: -2.6mm Bolt d.: 19.0mm Bolt Length: 40.5mm Info: 1st ring groove anodized, skirt MOS2 treated, fits tapered con. rod/td> Piston rings: 1.20x1.20x2.00mm

Gasket Design: Multilayer Steel (MLS) Thickness: 1.57 mm (+0.10 mm) Num. of holes: 2-hole

Enables swift and accurate checking of the bearing clearance on cross-divided plain bearings. It is especially well suited for checking the clearance of crankshaft main, con-rod and camshaft bearings on the engines of passenger cars and commercial vehicles. 'KS Plastic Gauge' is a thin, calibrated plastic strip which is inserted into the oil-free bearing position to measure the bearing...

Conrod design: trapezoidal connecting rod Large connecting rod eye bore diameter: 51.6mm Small connecting rod eye diameter: 30.0mm Width big end: 22.0mm Width small end: 22.0mm Type of connecting rod separation: cracked Length: 149.0mm

Position: Connecting rod Quantity: 4 pairs Shaft diameter: 52.980 / 53.000mm Housing bore: 56.000 / 56.019mm Wall thickness: 1.487mm Bearing width: 24.45mm

Position: Connecting rod Quantity: 4 pairs Shaft diameter: 52.980 / 53.000mm Housing bore: 56.000 / 56.019mm Wall thickness: 1.487mm Bearing width: 24.45mm