Piston diameter: 71.90mm Compression ring: 1.00mm Second ring: 1.20mm Oil ring: 2.00mm

Supplementary Article/Info 2: for keystone connecting rod Oversize: 0.5 mm Piston Protrusion: 5.5 mm Compression Height: 27.3 mm Height: 50.8 mm Cyl.Bore: 72.4 mm Bolt d.: 20 mm Bolt Length: 46.9 mm Valve Pocket Depth 1: 9 mm Component No.: 08-424307-00 Machined: with cut-out for oil jet

Width: 16 mm Number of Teeth: 116 Belts: with trapezoidal tooth profile Units/pulleys: tensioner pulley, bolt

Width: 18 mm Number of Teeth: 116 Belts: with trapezoidal tooth profile Units/pulleys: incl. tensioner pulley, bolt

Width: 16 mm Number of Teeth: 116 Belts: with trapezoidal tooth profile Units/pulleys: tensioner pulley, water pump, gasket, bolts Belt Material: HNBR (hydrogenated nitrile butadiene rubber)

Width: 18 mm Number of Teeth: 116 Belts: with trapezoidal tooth profile Units/pulleys: incl. tensioner pulley, water pump, gasket, bolts

Piston rings: 1.00x1.20x2.00mm A: 27.400 B: 50.900 C: 8.700 CD: 43.700 D: 5.500 E: -3.200 F: -2.700 Pin: 20.00 x 46.80 Features: Hard Anodising

Bore: 71.90mm Ring sizes: 1.00x1.20x2.00mm Oil ring type: 3 PC. FLEX-VENT

Bore: 72.40mm Ring sizes: 1.00x1.20x2.00mm Oil ring type: N/A

Cyl.Bore: 71.90mm is STD Compression Height: 27.3mm Length: 50.9mm Recess Depth: +5.6/-3.2mm Recess Diameter: 42.8mm Bolt d.: 20.0mm Bolt Length: 47.0mm Info: Top and 2nd ring lands anodized, skirt MoS2 treated, fits tapered connecting rod Piston rings: 1.00x1.20x2.00mm

Supplementary Info: with valve stem seals, with cylinder head gasket Gasket Design: Multilayer Steel (MLS) Hole diameter: 73 mm

Thread Size: M10 Bolt Head-/Nut Design: Female Splined (Ribe-CV®) Thread Pitch: 1.5 mm Length: 105 mm