Connecting rod 155mm fits Ford P22DTE Boxer Jumper Tourneo Transit 2.2 HDi TDCi
£40.08
VAT included
Number in pack: 1Big end width: 28.850 Big end diameter: 55.995-56.016 Center-to-center length: 155.000 Bore-to-bore length: 112.000 Pin end width: 28.850 Pin diameter: 30.020-30.035 Weight: 882 gr Specifications: Forged; Cracked; Tapered Torque: 60 Nm 2nd Torque option: 30 Nm + 100 degree Notice: Suitable for pistons with a compression height of 48.42 mm
Connecting rod is a part that connects one end to the piston and other end to the crankshaft. Today connecting rods BMY0804 are manufactured with hot forging method and weight is adjusted in moulding phase which allows to stay within minimum tolerance values range.
A5/S5 Sportback II (F53 / F5A / F5F) 2016 - current
2.0 TFSI quattro (2.0L / 252 Hp / Petrol / CYRB)
2.0 TFSI (2.0L / 252 Hp / Petrol / CYRB)
A4 Avant V (8W5 / 8WD / B9) 2015 - current
2.0 TFSI quattro (2.0L / 252 Hp / Petrol / CYRB)
2.0 TFSI (2.0L / 252 Hp / Petrol / CYRB)
Q7 II (4MB / 4MG) 2015 - current
2.0 TFSI quattro (2.0L / 252 Hp / Petrol / CYRB)
A4 Allroad V (8WH / 8WJ / B9) 2015 - current
2.0 TFSI quattro (2.0L / 252 Hp / Petrol / CYRB)
Volkswagen
Passat Variant VIII (3G5) 2014 - current
2.0 TSI (2.0L / 190 Hp / Petrol / DRFA)
Passat Saloon VIII (3G2 / A33 / CB2) 2014 - current
2.0 TFSI (2.0L / 190 Hp / Petrol / DRFA)
Specific References
New
Number in pack: 1Big end width: 28.850 Big end diameter: 55.995-56.016 Center-to-center length: 155.000 Bore-to-bore length: 112.000 Pin end width: 28.850 Pin diameter: 30.020-30.035 Weight: 882 gr Specifications: Forged; Cracked; Tapered Torque: 60 Nm 2nd Torque option: 30 Nm + 100 degree Notice: Suitable for pistons with a compression height of 48.42 mm
We use cookies: by using this site or closing this message you’re agreeing to our cookies policy