Connecting rod fits BMW N54B30 N55B30 N52B25 N52B30 N53B25 N53B30
€71.09
VAT included
Number in pack: 1Big end width: 20.850 Big end diameter: 53.600-53.616 Center-to-center length: 144.350 Bore-to-bore length: 106.550 Pin end width: 20.850 Pin diameter: 22.004-22.013 Weight: 575 gr Specifications: Forged; Cracked; Tapered Torque: 60 Nm
Connecting rod is a part that connects one end to the piston and other end to the crankshaft. Today connecting rods BMY1702 are manufactured with hot forging method and weight is adjusted in moulding phase which allows to stay within minimum tolerance values range.
M 235 i xDrive (3.0L / 326 Hp / Petrol / N55 B30 A)
228 i (2.0L / 245 Hp / Petrol / N26 B20 A)
220 i (2.0L / 184 Hp / Petrol / N20 B20 B)
228 i (2.0L / 245 Hp / Petrol / N20 B20 A)
220 i (2.0L / 184 Hp / Petrol / N20 B20 A)
6 Coupe II (E63 / E63N) 2003 - 2010
630 i (3.0L / 272 Hp / Petrol / N53 B30 A)
630 i (3.0L / 272 Hp / Petrol / N52 B30 BF)
630 i (3.0L / 258 Hp / Petrol / N52 B30 BF)
630 i (3.0L / 272 Hp / Petrol / N52 B30 B)
630 i (3.0L / 272 Hp / Petrol / N52 B30 A)
630 i (3.0L / 258 Hp / Petrol / N52 B30 A)
X5 III (F15 / F85) 2013 - 2018
xDrive 35 i (3.0L / 306 Hp / Petrol / N55 B30 A)
xDrive 40 e (2.0L / 313 Hp / Hybrid / N20 B20 A)
xDrive 28 i (2.0L / 245 Hp / Petrol / N20 B20 A)
Alpina
B3 Cabrio IV (E90) 2007 - 2013
3.0 BiTurbo (3.0L / 360 Hp / N54 B30 A)
3.0 2WD (3.0L / 400 Hp / N54 B30 B)
B4 Cabrio (F33) 2014 - current
S BITURBO (3.0L / 452 Hp / N55 B30 A)
3.0 B4 BiTurbo (3.0L / 409 Hp / N55 B30 A)
S BITURBO (3.0L / 440 Hp / N55 B30 A)
Specific References
New
Number in pack: 1Big end width: 20.850 Big end diameter: 53.600-53.616 Center-to-center length: 144.350 Bore-to-bore length: 106.550 Pin end width: 20.850 Pin diameter: 22.004-22.013 Weight: 575 gr Specifications: Forged; Cracked; Tapered Torque: 60 Nm
We use cookies: by using this site or closing this message you’re agreeing to our cookies policy