Cylinder liner fits 80.00mm piston d85.05mm L170.00mm Semi-Finish
€24.79
VAT included
Inner diameter (B): 79.50mm for 80.00mm
Outside diameter (O): 85.05mm
Flange outside diameter (F): 88.00mm
Flange height (H): 5.00mm
Total length (L): 170.00mm
Outside diameter (O): 85.05mm
Flange outside diameter (F): 88.00mm
Flange height (H): 5.00mm
Total length (L): 170.00mm
Semi-finished liners 080.2 are used in engine cylinder blocks where final machining is required after installation. They are supplied with a rough inner surface and must undergo boring and honing to achieve the correct diameter and surface finish for proper piston fit. The outer diameter is pre-finished with a 0.05 mm oversize to ensure a secure locking fit in the cylinder block.
Inner diameter (B): 79.50mm for 80.00mm
Outside diameter (O): 85.05mm
Flange outside diameter (F): 88.00mm
Flange height (H): 5.00mm
Total length (L): 170.00mm
Outside diameter (O): 85.05mm
Flange outside diameter (F): 88.00mm
Flange height (H): 5.00mm
Total length (L): 170.00mm